View PS2765-1-F4_933213.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DATA SHEET
PHOTOCOUPLER
PS2765-1
HIGH ISOLATION VOLTAGE AC INPUT RESPONSE TYPE 4-PIN SOP PHOTOCOUPLER
DESCRIPTION
The PS2765-1 is an optically coupled isolator containing GaAs light emitting diodes and an NPN silicon phototransistor. This package is mounted in a plastic SOP (Small Outline Package) for high density applications. The package has shield effect to cut off ambient light. -NEPOC
TM
Series-
FEATURES
* Isolation distance (0.4 mm MIN.) * AC input response * SOP (Small Outline Package) type * High isolation voltage (BV = 3 750 Vr.m.s.) * High-speed switching (tr = 4 s TYP., tf = 5 s TYP.) * Ordering number of taping product: PS2765-1-F3, F4 * UL approved: File No. E72422 (S) * BSI approved: No. 8436/8437
APPLICATIONS
* Hybrid IC * Programmable logic controllers * Power supply
The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for availability and additional information.
Document No. P14145EJ2V0DS00 (2nd edition) Date Published July 2000 NS CP (K) Printed in Japan
The mark * shows major revised points.
(c)
1998, 2000
PS2765-1
PACKAGE DIMENSIONS
in millimeters
40.5
TOP VIEW
4 3 1. Anode, Cathode 2. Cathode, Anode 3. Emitter 4. Collector
1
2
7.00.3 4.4
2.10.2
0.10.1
2.54 0.4
+0.10 -0.05
0.15 +0.10 -0.05
0.50.3 0.25 M
PHOTOCOUPLER CONSTRUCTION
Parameter Air Distance Creepage Distance Isolation Distance Unit (MIN.) 5 mm 5 mm 0.4 mm
2
Data Sheet P14145EJ2V0DS00
PS2765-1
ORDERING INFORMATION
Part Number PS2765-1 PS2765-1-F3 PS2765-1-F4 Package 4-pin SOP Packing Style Magazine case 100 pcs Embossed Tape 3 500 pcs/reel Application Part Number PS2765-1
*1
*1 For the application of the Safety Standard, following part number should be used.
ABSOLUTE MAXIMUM RATINGS (TA = 25 C, unless otherwise specified)
Parameter Diode Forward Current (DC) Power Dissipation Peak Forward Current Transistor
*1
Symbol IF PD IFP VCEO VECO IC
Ratings 50 80 1.0 40 5 40 1.5 150 3 750 -40 to +100 -55 to +150
Unit mA mW A V V mA mW/C mW Vr.m.s. C C
Collector to Emitter Voltage Emitter to Collector Voltage Collector Current Power Dissipation Derating Power Dissipation
PC/C
PC BV TA Tstg
Isolation Voltage
*2
Operating Ambient Temperature Storage Temperature
*1 PW = 100 s, Duty Cycle = 1 % *2 AC voltage for 1 minute at TA = 25 C, RH = 60 % between input and output
Data Sheet P14145EJ2V0DS00
3
PS2765-1
ELECTRICAL CHARACTERISTICS (TA = 25 C)
Parameter Diode Forward Voltage Terminal Capacitance Transistor Collector to Emitter Dark Current Current Transfer Ratio *1 (IC/IF) Collector Saturation Voltage Isolation Resistance Isolation Capacitance Rise Time Fall Time
*2
Symbol VF Ct ICEO IF = 5 mA
Conditions
MIN.
TYP. 1.1 30
MAX. 1.4
Unit V pF
V = 0 V, f = 1 MHz IF = 0 mA, VCE = 40 V IF = 5 mA, VCE = 5 V IF = 10 mA, IC = 2 mA
11
100
nA
Coupled
CTR
50
100
400
%
VCE (sat)
0.3
V
RI-O CI-O tr tf
VI-O = 1 kVDC V = 0 V, f = 1 MHz VCC = 5 V, IC = 2 mA, RL = 100
10
0.4 4 5
pF
s
*2
*1 CTR rank N: 50 to 400 (%) *2 Test circuit for switching time
Pulse Input PW = 100 s Duty cycle = 1/10 IF In monitor 50 RL = 100 VOUT VCC
4
Data Sheet P14145EJ2V0DS00
PS2765-1
TYPICAL CHARACTERISTICS (TA = 25 C, unless otherwise specified)
DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE
Transistor Power Dissipation PC (mW)
TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE
210 180 150 120 90 60 30 0 25 50 75 100
100
Diode Power Dissipation PD (mW)
80
60
40
20
0
25
50
75
100
Ambient Temperature TA (C)
Ambient Temperature TA ( C)
FORWARD CURRENT vs. FORWARD VOLTAGE
100
COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE
35 30 IF = 25 mA 20 mA 15 mA 10 mA
10
Collector Current IC (mA)
Forward Current IF (mA)
TA = +100 C +60 C +25 C
25 20 15 10 5 5 mA
1 0 C -25 C -50 C
0.1
0.01 0.0
0.5
1.0
1.5
2.0
0
2
4
6
8
10
Forward Voltage VF (V)
Collector to Emitter Voltage VCE (V)
COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE
Collector to Emitter Dark Current ICEO (nA)
COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE
100 10 mA 5 mA 2 mA 10
10 000
1 000 VCE = 20 V 40 V 100
Collector Current IC (mA)
1
IF = 1mA
10
1 -25
0
25
50
75
100
0.1 0.0
0.2
0.4
0.6
0.8
1.0
Ambient Temperature TA (C)
Collector Saturation Voltage VCE(sat) (V)
Data Sheet P14145EJ2V0DS00
5
PS2765-1
NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE
Normalized Current Transfer Ratio CTR
1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 -50 -25 0 25 Normalized to 1.0 at TA = 25 C, IF = 5 mA, VCE = 5 V 50 75 100 400
CURRENT TRANSFER RATIO vs. FORWARD CURRENT
Current Transfer Ratio CTR (%)
350 VCE = 5 V, n=3 300 250 200 150 100 50 0 0.1 1 10 100
Ambient Temperature TA (C)
Forward Current IF (mA)
SWITCHING TIME vs. LOAD RESISTANCE
100 IC = 2 mA, VCC = 5 V, CTR = 200 % 1 000
SWITCHING TIME vs. LOAD RESISTANCE
IF = 1 mA, VCC = 5 V, CTR = 200 % tf
Switching Time t (s)
Switching Time t ( s)
100
ts
10
tf tr td
10 tr 1 td
1 10
ts 100 1k 10 k
Load Resistance RL ()
0.1 10
100
1k
10 k
100 k
Load Resistance RL ()
FREQUENCY RESPONSE
1.2
LONG TERM CTR DEGRADATION
IF = 5 mA
0
1.0
CTR (Relative Value)
Normalized Gain Gv
-5 RL = 1 k -10 -15 -20 -25 0.1
100
0.8 0.6 0.4 0.2 0.0 IF = 1 mA, TA = 25 C IF = 5 mA, TA = 25 C IF = 20 mA, TA = 25 C IF = 20 mA, TA = 60 C
300
1
10 Frequency f (kHz)
100
1 000
1
102
103
104
105
106
Time (Hr)
Remark The graphs indicate nominal characteristics.
6
Data Sheet P14145EJ2V0DS00
PS2765-1
TAPING SPECIFICATIONS (in millimeters)
Outline and Dimensions (Tape)
2.00.1 4.00.1
1.750.1
1.550.1
2.40.1
12.00.2
5.50.1
1.550.1 8.00.1
4.60.1
0.3
Tape Direction
PS2765-1-F3
PS2765-1-F4
Outline and Dimensions (Reel)
1.5
21.00.8
120
7.40.1
1.50.5
60
6.01
330
2.00.5
13.00.5
805.0
12.4+2.0 -0.0
Packing: 3 500 pcs/reel
Data Sheet P14145EJ2V0DS00
7
PS2765-1
NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering
* Peak reflow temperature * Time of temperature higher than 210 C * Number of reflows * Flux 235 C or below (package surface temperature) 30 seconds or less Three Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.)
Recommended Temperature Profile of Infrared Reflow
Package Surface Temperature T (C)
(heating) to 10 s 235 C (peak temperature) 210 C to 30 s 100 to 160 C 60 to 120 s (preheating)
Time (s)
(2) Dip soldering * Temperature * Time * Number of times * Flux 260 C or below (molten solder temperature) 10 seconds or less One (Allowed to be dipped in solder including plastic mold portion.) Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) (3) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
2. Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler's input and output or between corrector-emitters at startup, the output side may enter the on state, even if the voltage is within the absolute maximum ratings.
8
Data Sheet P14145EJ2V0DS00
PS2765-1
[MEMO]
Data Sheet P14145EJ2V0DS00
9
PS2765-1
[MEMO]
10
Data Sheet P14145EJ2V0DS00
PS2765-1
[MEMO]
Data Sheet P14145EJ2V0DS00
11
PS2765-1
CAUTION
Within this device there exists GaAs (Gallium Arsenide) material which is a harmful substance if ingested. Please do not under any circumstances break the hermetic seal.
NEPOC is a trademark of NEC Corporation.
* The information in this document is current as of July, 2000. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. * NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. * NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above).
M8E 00. 4

▲Up To Search▲

Price & Availability of PS2765-1-F4

	To Download PS2765-1-F4 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .